Hammer-Close-up view of a hammer.

Teaser-No parkerizing yet...

Scope base/rail-Welded, bead-blasted, ready to be welded to the gun.

Grip assemblies-Boxes full of them, awaiting one final operation.

Grip assembly #1- Here is one in the VMC, getting the final hole drilled and tapped.

Grip assembly #2-This is the entire pistol grip assembly.  It uses all AR-15 parts except the disconnector.

Bolt #1-Shows the lug area of the bolt head.

Bolt #2-Front view of the bolt head.

Bolt #3-It's in there, believe me. Coolant blasts the part as the VMC does its job.

Bolt #4-Once the cutter pulls back and the coolant flow stops...

Bolts-A box full of them.

Barrel extension/receiver- Two of 'em...just back from heat treating and bead blasting.

Bolt assembly- Welded assembly using bolt head above.  Slot is for camming the hammer back.

Parts- All parts, ready to be welded together.

Almost done- Welded, ready for test-firing.