Serbu Firearms, Inc., Tampa, Florida

Sniper · Posted: Fri Apr 21, 2006 11:39 am Post subject: Well, I ordered my BFG-50

After doing my own DD, I decided Mark's BFG-50 with the 36" barrel was "the bomb" so I ordered one.

I understant there will be a considerable wait do to the fact the 36" (non stainless) barrels are not in stock and are on order.

It's ok... 6-8 weeks is a acceptable wait, 'course that's easy for me to say in week one Smile

I chatted with Mark regarding a reasonably priced scope (Night Force being beyond what I wanted to spend at this time) and he gave me a suggestion. But at this point I think I would still like more zoom. I have at least 6 weeks. to figure that one out.

Anyway, nice to be here Cool

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

mrkubota · Posted: Fri Apr 21, 2006 12:09 pm Post subject:

Welcome and congrats on the order!
Post some pics of it when you get it...

I've had a used Leupold VX-III (6.5-22) mil-dot on mine in the past. It served very well until I was able to buy the NightForce I've got now. Just watch out for the short eye relief at magnification levels beyond 16x. Rolling Eyes

If you'll be needing a case to transport it, I've had good results with the long 'GuardForce' wheeled case:

http://www.exploreproducts.com/guardforcegds-9290cwguncase.htm

You wouldn't happen to have known Marine Sgt Ismael (Mel) Ramirez from Oceanside, Ca back then would you? (an uncle of mine who served there about the same time)
_________________
Early BFG-50 in .50DTC
http://www.youtube.com/watch?v=14RUn8AnQxY

Sniper · Posted: Fri Apr 21, 2006 12:21 pm Post subject:

Nope on knowing Sgt Ismael, sorry.

Thanks for the heads up on a case, I'll check it out.

Maybe we can get Mark to post pics of the gun as he is building it Smile

Just a thought.

I am concerned with eye relief. Just HOW MUCH recoil (to the head) do I need to adjust for? I have never shot a 50 cal before from the shoulder...I'm not concerned with shoulder recoil just don't want any more blows to the head. Smile

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

mrkubota · Posted: Fri Apr 21, 2006 2:11 pm Post subject:

4" of eye relief is what I like to have on my scopes.
3" is manageable as long as you're aware of it and are ready to roll with the gun.
Since your gun will likely be a bit heavier than the average. The felt recoil will be less as well. (not that it's bad anyway...)
My 29" Serbu is less punishing than a 12ga to me.
The muzzle blast from the brake is more what you'll notice when you shoot it for the first time!
Don't leave any lightweight or loose items on the benches to either side! Embarassed

_________________
Early BFG-50 in .50DTC
http://www.youtube.com/watch?v=14RUn8AnQxY

Sniper · Posted: Wed Apr 26, 2006 2:28 pm Post subject: UPDATE

Called Serbu today and made a couple of minor changes to my order. Now my BFG 50 should be ready in a couple weeks, I believe. I just couldn't wait the possible 8 week period.

They had only the SS barrels in stock in the 36" length, so I just had them change my barrel to SS with a SS brake on it and the delay time went away.

Smile

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

markserbu · Posted: Thu Apr 27, 2006 10:23 pm Post subject: Re: UPDATE

Hey, Sniper...call the shop tomorrow (Friday). Might be able to get your gun out either Friday or Monday, but need to discuss a couple of things with you.

Sniper · Posted: Thu Apr 27, 2006 11:08 pm Post subject:

Will do Mark.

Guess I'd better prepare my wife for the shock of paying for it. It was a Birthday Gift as my B-Day was April 25th ....

Very Happy

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Fri Apr 28, 2006 12:09 pm Post subject: UPDATE

Just got off the phone with Mark and he said he would show some pics of the BFG he is making for me (gratis my wife).

I believe he is going to show some before and after (and probably during) pics.

Mark is a really nice guy and it's a pleasure of have him make this particular BFG for me... Very Happy

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Fri Apr 28, 2006 1:44 pm Post subject:

It's fun watching my BFG being built.. and I particularly like the "George Lucas" touch in the serial number Smile

who could ask for more?
_________________
USMC Viet Nam Vet '66-'68 Semper Fi

mrkubota · Posted: Fri Apr 28, 2006 2:38 pm Post subject:

Whoa, that's right.... I thought that number sounded familiar! Wink

_________________
Early BFG-50 in .50DTC
http://www.youtube.com/watch?v=14RUn8AnQxY

Sniper · Posted: Fri Apr 28, 2006 10:25 pm Post subject:

My BFG looks really sweet so far... anyone know if they work on Saturday Smile

From comparing it to the other pics on this website it appears I have one helluva BULL BARREL attached... I love it.
_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Mon May 01, 2006 1:58 pm Post subject:

Ok, Monday is finally here and I'm anxious to see more pictures of my BFG as it nears completion.... I hope Mark remembers to stop in periodically and keep us up to date. Smile

From what I've seen so far it would be an understatement to say I'm very pleased ... I particularly like the BULL BARREL and I hope the finger prints get removed Smile

I believe the overall length as posted on the website is 51 1/2 inches... it this an ACCURATE dimension... finding a 52" "drag bag" is going to be a challenge, anyone have one or know where to get one?

I will probably use it just for a carry bag if I don't go with a hard case but I still like drag bags.
_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Mon May 01, 2006 11:46 pm Post subject:

Ok, just got a PM from Mark and my BFG was actually finished on Friday. He is a REALLY BUSY guy and I totally understand that.... he said he will post the completed pics on my BEAST tomorrow.

He also related to me that the overall length of my BFG is somewhere around 58 inches NOT 51.5.... GOOD THING the new Drag Bag is 60+"...

I can hardly wait to see the finished product tomorrow... Smile

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Tue May 02, 2006 1:18 pm Post subject: Wells Fargo subsidiary Mexico

Well, I woke up this morning to a SNAG.... boy I hate the incompetence of the average person today..

Since we do not keep more than about 2K in the checking portion of our accounts I (Carole that is since she is buying this for me) needed to transfer 1K from here savings account IN THE SAME BANK to her checking account IN THE SAME BANK... which is supposed to be immediate..

Serbu tried to run the card we gave them and it was declined... we called the bank and they assured us the money transferred.... and is available as we speak... talk about a rock and a hard place...

It appears we will need to go to the bank and do a face to face to be sure the job has been done correctly....

If we didn't run company business through this back to the tune of 6 digits a year I'd move our personal accounts.

Just for your knowledge: Wells Fargo Bank has agreed to give ILLEGAL ALIENS HOME LOANS... I got this from a Minuteman memo.. this ought to infuriate some of you... I know it does me, enough to make us start looking to refinance this property with another bank and at the same time transfer our personal accounts... Maybe if I was and illegal I wouldn't need to waste my time going down there today..

Evil or Very Mad

_________________
USMC Viet Nam Vet '66-'68 Semper Fi

Sniper · Posted: Tue May 02, 2006 2:58 pm Post subject:

UPDATE.... recalled the bank and apparently everything is fine now.... you don't suppose they read this thread do you?? Very Happy

_________________
USMC Viet Nam Vet '66-'68 Semper Fi