Serbu Firearms, Inc., Tampa, Florida Forum Index Serbu Firearms, Inc., Tampa, Florida
Get it from the horse's mouth!
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

anyone makin 50 dtc rounds?

 
Post new topic   Reply to topic    Serbu Firearms, Inc., Tampa, Florida Forum Index -> Reloading
View previous topic :: View next topic  
Author Message
stone cold steve austin
Dangerous


Joined: 16 May 2006
Posts: 17
Location: Pasadena, Ca

PostPosted: Wed Feb 21, 2007 8:18 pm    Post subject: anyone makin 50 dtc rounds? Reply with quote

just as the subject states...has anyone been mass producing 50dtc rounds that live in So. Cal....
_________________
Brews, Blues & BBQ
Back to top
View user's profile Send private message Send e-mail AIM Address
mrkubota
Guru


Joined: 23 Jul 2005
Posts: 243
Location: Eastern AZ, Southern CA

PostPosted: Wed Feb 21, 2007 10:05 pm    Post subject: Reply with quote

EDM Arms in Redlands has the ammo Jerry Hazlett's been making for them. The 'forming ammo' works fine in the Serbu.
_________________
Early BFG-50 in .50DTC
http://www.youtube.com/watch?v=14RUn8AnQxY
Back to top
View user's profile Send private message Send e-mail Visit poster's website
mrkubota
Guru


Joined: 23 Jul 2005
Posts: 243
Location: Eastern AZ, Southern CA

PostPosted: Tue Jul 17, 2007 2:13 pm    Post subject: Reply with quote

With the increasing popularity of the .50DTC cartridge in CA, I decided to go into the ammunition manufacturing business (06FFL) as a part-time endeavour.
I am making small lots of DTC and M48 spotter to begin with.
Current lots of .50DTC are being made from unfired TZ-77,78,79 brass.
Ammunition has been tested in both Serbu BFG and SHF UltraMag rifles.

Cartridges are prepped, FL Sized, formed and ready to be fire-formed in your own BFG-50 for a precise fit.

//Ben
mrkubota@yahoo.com
RSR Development, LLC





_________________
Early BFG-50 in .50DTC
http://www.youtube.com/watch?v=14RUn8AnQxY
Back to top
View user's profile Send private message Send e-mail Visit poster's website
50 Shooter
Guru


Joined: 24 Oct 2005
Posts: 158
Location: People's Republik of Kalifornia

PostPosted: Tue Jul 17, 2007 2:53 pm    Post subject: Reply with quote

I just wanted to add that Ben is great at reloading, we did some reloading for a project and swapped some loaded ammo.

We hit the range and were shooting our .50's, all of the loaded stuff we put together was great. The other ammo we swapped gave him a problem ( a couple, they were fired in my rifle) when chambering, we stuck it in mine and kept on shooting. Seeing an AMAX round hit dead center at 600 yards and flash (must be a small amount of magnesium in that aluminum) is awesome!

Ben's a great friend and is always willing to help out, if you need .50 DTC or other ammo I would highly recommend him.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Serbu Firearms, Inc., Tampa, Florida Forum Index -> Reloading All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group